Next Gen Digital Pressure switch Home Booster Pump

The MECHLION™ Water Pressure Booster set was built with one simple goal in mind – to be the Most Unique, compact, and reliable Residential Booster sets in the market for residential, light commercial and irrigation use.

The FX-BOOST series is a Next-Gen All-in-One Single Booster pump for boosting both Hot and cold water. The system is fitted along with Net-Gen digital pressure switch with full protection controller for high performance. by using this booster pump there is no more pump frequently ON/OFF, unstable water pressure and noise problems.

A single-speed, totally enclosed fan-cooled motor drives the MECHLION™ booster pump with single phase power. It indicates Its working status by illuminating dual LED signal. The indication readouts are simple and easy to understand.

– Pressure transmitter inside, stable and accuracy.
– Switch of the pump during water shortage and on with water.
– MCU microcomputer process chip, safe and intelligent control.
– One-click set up on/off limit.

The supplied systems consist of fully assembled and factory-tested units that include a pump, pressure tank with a bladder, Next-Gen Digital Pressure switch, pressure gauge and specialized Stainless steel 5 way valve mounted on a skid with anti-vibration mount.

These systems are designed to deliver adequate water pressure for modern household appliances, ensuring a reliable water supply. As a result, they are extensively utilized in residential water applications to stabilize system pressure. The operation of these systems is regulated by the pressure switch, which activates or deactivates the pump based on pressure set by user.

Motor Details & Operating Conditions

Motor Details

  • Motor Type                             : 2 Pole, Totally enclosed Fan cooled
  • Frequency                               : 50HZ
  • Standard Voltages                  :1Ø – 220 – 240 V
  • Insulation Class                      : F class (155°C)
  • Enclosure Protection Class     : IP 54
  • Nominal Speed                      : 2850 rpm
  • Duty/Ratings                         : S1/Continous
  • Rated Speed                           : 2900 RPM

Operating Condition

  • Liquid Temperature      : 2°C – 40°C / 2°C – 90°C (Hot water Type)
  • Ambient Temperature  : 0°C – 40°C
  • Max. System Pressure  : 10 kg/cm²
  • Working Pressure Range: 0-10 Bar, matching with all pumps
  • Relay Capacity: 220V AC 10A.
  • Output signal: active output, to provide pump 220V, start the pump below 1.5KW directly.
  • Waterproof: IP466
  • Long Life: can be used continuously for more than 20 million times.
  • Socket type: 3 Pin

Key Components Description

Unique Benefits & Features


Unique: Our booster sets are the most uniquely designed system available in the market. With its All-in-one design which integrates patented intelligent pump controller along with Pump, Pressure switch, flow switch and pressure tank. All you need is to just plug and start using it.


Our booster sets are with the Stainless steel Multistage pump which are extremely low noise in operation, so no more noise issue from pump short cycling.

Intelligent & Solid Build

Our intelligent Digital Pressure switch pump controller Electronic Circuitry Continuously monitors system, making sure that you have good, reliable pressure when you want it.


Electronic components are completely separated from piping and water ways for added safety and ease of field repair. pressure. Each component of the system is specifically designed to work together as one harmonious unit.

Dry Run Protection

Controller wrote in dry-run protecting function to prevent pump or pipe damage (dry run without water over 2 min), the pump will automatically rest for 15 min & restart again, if above cycling happen accumulate 10 times, the rest time will become 90 min & restart afterward.

Anti-Block System

To prevent mechanical seal or impeller stick together, If the pump remains idle for 24 consecutive hours, the device will carry out a start-up of the pump motor for about 5 seconds

Next-Gen Digital Pressure switch

Technical Specification

Model Phase Power Head Flow Ampere No of taps Connection Weight
HP Watt Rated
Inlet /
CSB (H) -200 Single Phase
220-240 V
0.25 200W 12.5 25 21 41 1.1/1.1 1.8/1.7 2 RP or NPT 1″ 10
CSB (H) -300 0.35 300W 13.5 30 28 50 1.4/1.4 2.2/2.1 3 10.5
CSB (H) -400 0.5 400W 14.5 35 32 55 1.7/1.7 2.4/2.3 4 11
CSB (H) -600 0.75 600W 15.5 40 43 70 2.7/2.6 4.2/4.0 5 13
CSB (H) -800 1 800W 17 45 50 80 3.1/3.0 5.2/4.9 6 14.5

Components / Materials

No. Component Material No. Component Material
1,2 Pump & Motor
FC200 9 Pressure tank SPCC
3 Motor ADC12 10 Motor fan PP
4 Shaft Stainless Steel 400 11 Fan cover PP
5 Mechanical
CER + CA + NBR (Std) 12 Pump base ABS
CER + CA + VITON (Hot) 13 Wiring box ABS
6 Impeller Brass 14 Filling plug Nylon
7 Flow switch +
check valve
Nylon+POM 15 Flange FC200
8 Pressure switch Nylon 16 Flange gasket NBR

This website uses cookies and asks your personal data to enhance your browsing experience.